Zte ZXR10 8900 Series User Manual page 76

ZXR10 8900 Series User Manual (FW Volume)
66 Confidential and Proprietary Information of ZTE CORPORATION
Command
ZXR10(config)#interface {vlan
<vlan-id>|<vlan-if>}
Command Illustration:
To create VLAN L3 interface, it is necessary to create this VLAN
firstly.
9. Enabling/Disabling VLAN L3 interface (used under if-vlan node)
Command
ZXR10(config-if-vlan10)#shutdown/
no shutdown
Command Illustration:
To enable/disable VLAN L3 interface is just to enable/disable
VLAN L3 forwarding function and it doesn't influence member
ports of this vlan. When all Ethernet interfaces under VLAN
interface are down, vlan interface is down by default; when
one or more Ethernet interfaces under one VLAN interface are
up, the vlan interface is up. VLAN interface in up state can be
disabled by force.
Function
This creates VLAN L3
interface.
Function
This enables/disables
VLAN L3 interface.