Zte ZXR10 8900 Series User Manual page 42

ZXR10 8900 Series User Manual (FW Volume)
32 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
add
name
<string1>
ip1
<string2>
ip2
<string3>
except
<string4>
session
<number1>
Command Illustration:
The value of ip1 mustn't be larger than that of ip2, or it will
report error. The value of parameter Except shall be within
the range between Ipaddress1 and Ipaddress2.
The default range configuration for ZXR10 8900 Series Switch
FW service card is any0.0.0.0-255.255.255.255. At the same
moment, the number of connections of individual addresses
within the address range cannot exceed the number of max
sessions.
Example:
To add address range1 and set the range to 192.16.1.10-
192.16.2.81, execute the following command:
ZXR10_FW.define# range add name range1 ip1
192.16.1.10 ip2
2. Modifying address configuration range.
Command
ZXR10_FW.define#range modify
name <string1> ip1 <string2> ip2
<string3>[except <string4>][session
<number1>]
Parameter Description:
Parameter
modify
name
<string1>
Description
This adds address range.
This sets name for address range.
This is one string, indicating the name of
address range.
This sets start IP address for address range.
This is one string, indicating IP address, in
format of 0.0.0.0.
This sets end IP address for address range.
This is one string, indicating IP address, in
format of 0.0.0.0.
This sets except IP address in address range.
This is one string, indicating IP address, in
format of 0.0.0.0.
This sets the number of session.
This is one number, indicating the number of
sessions.
192.16.2.81
Description
This modifies address range.
This sets name for address range to be modified.
This is one string, indicating the name of
address range.
Function
User can add, modify
and delete address
range in management
of address range of
FW.