Logging Into Fw Through Browser - Zte ZXR10 8900 Series User Manual

The following steps show how to log into FW through Telnet:
Example
1. Binding fw-template 1 with slot number.
ZXR10(config) # fw ZXR10(config-fw) # fw-template 1
ZXR10(config-fw-template-1) # bind slot 2
ZXR10(config-fw-template-1) # exit ZXR10(config-fw) # exit
2. Configuring IP address for L3 vlan interface.
ZXR10(config) # vlan 2 ZXR10(config-vlan2) # exit
ZXR10(config) # int vlan 2
ZXR10(config-if-vlan2) ip addr
3. Accessing FW configuration node and configuring IP address of
VLAN interface to management IP of managed FW card.
ZXR10(config-if-vlan2) exit ZXR10(config) fw
ZXR10(config- fw) bind mng-ip 2
4. Accessing FW card through terminal telnet.
telnet 10.2.2.1

Logging into FW through Browser

It is available to log into FW module through browser and conduct
Context
some basic settings on FW.
1. Selecting the interface of vlan where administrator locates and
Steps
configuring IP address for the interface.
Command
ZXR10(config-if-vlan1)#ip address <
ipaddress >< maskaddress >
Parameter Description:
Parameter
< ipaddress >
< maskaddress
>
2. Accessing FW configuration node and configuring IP address of
VLAN interface to management IP of managed FW card.
Command
ZXR10(config-fw)#bind mng-ip <slot
number >< ipaddress >
Parameter Description:
Description
It is IP address, in form of A.B.C.D.
It is subnet mask, such as 255.255.255.0.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 Firewall Overview
10.2.2.1 255.255.255.0
10.2.2.1
Function
It configures IP
address and subnet
mask for L3 vlan 1.
Function
IP address of
vlan 1 interface is
management IP of FW
card in slot 2.
7