Zte ZXR10 8900 Series User Manual page 80

ZXR10 8900 Series User Manual (FW Volume)
70 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
add
action
accept|reject
l2protocol
arp|0806|rarp|8035
|ipx|8137
log
yes|no
area
<string1>
smac
<string2>
dmac
<string3>
Example:
To add arp accept rule to area_eth1 and record it into log,
execute the following command:
ZXR10_FW.pf # rule add action accept l2protocol
arp smac 00:50:04:C3:B0:31
4. Adding one L3 protocol packet filtering rule.
Command
ZXR10_FW.pf #rule add action
<accept|reject> l3protocol <number>[l
og<yes|no>][area <string1>][smac <
string2 >][dmac < string3>]
Parameter Description:
Parameter
add
action
accept|reject
l3protocol
<number>
log
yes|no
Description
This adds one packet filtering rule.
This is the action to packet meeting rules:
permit or deny
permit|deny
This is the L2 protocol type used by packet.
ARP| ARP protocol number|RARP| RARP
protocol number|IPX|IPX protocol number
This specifies whether to record it into log.
Yes|No
This specifies area resource.
This is one string, which must be one
predefined area resource.
This sets source mac address.
This is one standard mac address string.
This sets destination mac address.
This is one standard mac address string.
Function
This adds one L3
protocol packet
filtering rule.
Description
This adds one packet filtering rule.
This is the action to packet meeting rules:
permit or deny
permit|deny
This is the L3 protocol type used by packet.
This is the protocol number.
This specifies whether to record it into log.
Yes|No