Zte ZXR10 8900 Series User Manual page 23

Command
ZXR10_FW.system authset #faillock
show
5. Setting max concurrent management site-related parameter.
Command
ZXR10_FW.system authset #managerm
axlogin set maxnum<number>
Parameter Description:
Parameter
set maxnum
<number>
Example:
To set max concurrent management sites to 16, execute the
following command:
ZXR10_FW.system .authset # managermaxlogin set maxnum 16
6. Showing max concurrent management site-related parameter.
Command
ZXR10_FW.system authset #managerm
axlogin show
7. Setting max concurrent administrator number.
Command
ZXR10_FW.system authset #maxonline
adm set maxnum<number>
Parameter Description:
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Management Configuration
Description
This sets max concurrent management
site-related parameter.
This is the max number, in range of 1-32.
Function
This shows
authentication faillock
time.
Function
This sets max
concurrent manag
ement site-related
parameter, that
is, setting the max
number of sites (IP)
from which the same
administrator name
can log into the same
one device. The
default value is 5, in
range of 1-32. For
example, one device
is configured with
multiple IP addresses
and this command
limits the number of
IP addresses, with
which one user can
log in.
Function
This shows max
concurrent manag
ement site-related
parameter.
Function
It sets max concurrent
administrator number.
13