Configuring Maintenance - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (FW Volume)
22 Confidential and Proprietary Information of ZTE CORPORATION

Configuring Maintenance

1. Validating the configurations newly added to system.
Command
ZXR10_FW.system #config implement
Command Illustration:
With this command, the newly added configurations get valid
on device immediately but they are not saved. To apply these
configurations next time when enabling FW, it is needed to save
configurations.
2. Loading default configuration.
Command
ZXR10_FW.system #config reset
3. Saving current system configuration.
Command
ZXR10_FW.system #config save
4. Showing configurations previously saved on system.
Command
ZXR10_FW.system #config show
5. Showing current system configuration.
Command
ZXR10_FW.system #config show_runn
ing
Function
This validates the
configurations newly
added to system.
Function
This loads default
configuration.
Function
This saves current
system configuration.
Function
This shows
configurations
previously saved on
system.
Function
This shows current
system configuration.