Zte ZXR10 8900 Series User Manual page 29

Parameter
id
<number>
Command Illustration:
Service rule can be modified except for id.
Example:
To modify the service whose id is 8361 and open gui service,
execute the following command:
ZXR10_FW.pf #service modify id 8361 name gui
area area_intervlan0 addressname any
3. Showing one open service rule.
Command
ZXR10_FW.pf #service show [name
<gui|snmp|ssh|monitor |ping|teln
et|ids|auth|ntp|update|dhcp |rip |
l2tp|pptp|webui |ipsecvpn >]
Parameter Description:
Parameter
show
name
Command Illustration:
When type is selected, the setting of specified service type is
shown; when type is not selected, all rules are shown.
Example:
To show gui open service rule, execute the following command:
ZXR10_FW.pf #service show name
4. Deleting one open service rule.
Command
ZXR10_FW.pf #service delete id
<number>
Parameter Description:
Parameter
delete
id
<number>
Command Illustration:
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Management Configuration
Description
This specifies ID for the rule.
This is a number and must be the id of a rule
that has been added.
Description
This shows one open service rule.
This selects name of the service to be viewed.
Description
This deletes one open service rule.
This selects id of service opened by GW.
It is a number.
Function
This shows one open
service rule.
gui
Function
This deletes one open
service rule.
19