Zte ZXR10 8900 Series User Manual page 43

Parameter
ip1
<string2>
ip2
<string3>
except
<string4>
session
<number1>
Command Illustration:
At the same moment, the total number of connections of all
hosts within the address range cannot exceed the number of
max sessions.
Example:
To modify address range to 192.16.1.11—192.16.2.82 after
adding range1 with address 192.16.2.1 excepted, execute the
following command:
ZXR10_FW.define# range modify name range1
ip1 192.16.1.11 ip2
3. Renaming address configuraiton range.
Command
ZXR10_FW.define#range rename
oldname <string1> newname
<string2>
Parameter Description:
Parameter
rename
oldname
<string1>
newname
<string2>
Example:
To rename address range1 to range2, execute the following
command:
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Resource Management Configuration
Description
This sets start IP address for address range.
This is one string, indicating IP address, in
format of 0.0.0.0.
This sets end IP address for address range.
This is one string, indicating IP address, in
format of 0.0.0.0.
This sets except IP address in address range.
This is one string, indicating IP address, in
format of 0.0.0.0.
This sets the number of session.
This is one number, indicating the number of
sessions.
192.16.2.82 except 192.16.2.1
Description
This renames address range.
This specifies the name of address range to be
renamed.
This is one string, indicating the name of
address range (the name of address range has
been defined).
This specifies new name for address range.
This is one string, indicating the new name of
address range.
Function
This renames address
range.
33