Zte ZXR10 8900 Series User Manual page 27

Service Description
Telnet It allows user to configure and manage device
through TELNET.
IDS It allows interaction with IDS device.
User can implement simple L2/L3 access control by setting packet
filtering policy. When receiving one packet, device will match
it with packet filtering policy sequentially. In case no policy is
matched, the packet will be processed according to default rule.
According to factory configuration, all packets can pass FW by
default.
To access this command module, execute the following command:
#pf
To exit from this command module, execute the following com-
mand:
#exit
After logging into GW and accessing this command module, CLI
administrator can execute corresponding component management
commands. The following parts will introduce all component man-
agement commands under this command module. The format of
command in the example is that after accessing this command
module.
1. Adding one open service rule.
Command
ZXR10_FW.pf #service add name
<gui|snmp|ssh|monitor|ping|teln
et|ids|auth|ntp|update|dhcp|rip
|l2tp|pptp|webui|ipsecvpn|sdmi >
area <string1><addressid <number1>|
addressname <string2>>
Parameter Description:
Parameter
add
name
gui
snmp
ssh
monitor
ping
telnet
ids
auth
ntp
update
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 System Management Configuration
Description
This adds one open service rule.
This selects the name of service opened by GW.
It is GUI service.
It is SNMP service.
It is SSH service.
It is MONITOR service.
It is PING service.
It is telnet service.
It is IDS service.
It is AUTH service.
It is NTP service.
It is upgrade service.
Function
This adds one open
service rule.
17