Zte ZXR10 8900 Series User Manual page 113

Parameter
<string2>
protocol
udp|tcp
port
<number>
2. Modifying one application protocol port binding policy.
Command
ZXR10_FW.dpi #policy modify id
<number1>name <ftp|smtp|tftp|http|p
op3|sun_rpc|ms_rpc|sqlnet|rtsp|h225|
h225ras|mms | sip|imap|telnet > net
<string1> mask <string2> protocol
<udp|tcp> port <number2>
Parameter Description:
Parameter
modify
id
<number1>
name
ftp|smtp|tftp|http|p
op3|sun_rpc|ms_rp
c|sqlnet|rtsp|h225|
h225ras|mms |
sip|imap|telnet
Command Illustration:
Command policy show can be used to view ID of policy.
3. Deleting one application protocol port binding policy.
Command
ZXR10_FW.dpi #policy delete id
<number>
Parameter Description:
Parameter
<number>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Protocol Filtering Configuration
Description
This is one standard address mask string.
This specifies the name of used protocol.
This selects the protocol to be used: UDP
or TCP.
This customizes service port of this
protocol.
This is the service port id.
Function
This modifies one
application protocol
port binding policy.
Description
This modifies one application protocol port
binding policy.
This is the ID of policy to be modified.
This is one number.
This is one string, specifying the name of
protocol which is to re-define port.
ftp protocol|smtp protocol|tftp
protocol|http protocol|pop3 prot
ocol|sun_rpc protocol|ms_rpc
protocol|sqlnet protocol|rstp protocol|h225
protocol|h225ras protocol|mms
protocol|sip protocol|imap protocol|telnet
protocol
Function
This deletes one
application protocol
port binding policy.
Description
This is one number, which is the ID of
policy.
103