Zte ZXR10 8900 Series User Manual page 28

ZXR10 8900 Series User Manual (FW Volume)
18 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
dhcp
rip
l2tp
pptp
webui
ipsecvpn
sdmi
area
<string1>
addressid
<number1>
addressname
<string2>
Command Illustration:
Parameters addressid and addressname can be used at the
same time. However, it must be confirmed that the objects
corresponding to addressid and addressname are unique, or
services will fail to be added.
Example:
To open webui service for area_intervlan0 (where area_inter-
vlan0 is the preset area object), execute the following com-
mand:
ZXR10_FW.pf # service add name webui area
area_intervlan0 addressname any
2. Modifying one open service rule.
Command
ZXR10_FW.pf #service modify id
<number>[name <gui|snmp|ssh|m
onitor|ping|telnet|ids|auth|ntp|u
pdate|dhcp|rip|l2tp|pptp|webui|i
psecvpn>][area <string1>][addressid
<number1>][addressname <string2>]
Parameter Description:
Parameter
modify
Description
It is DHCP service.
It is RIP service.
It is L2TP service.
It is PPTP service.
It manages GW through WEBUI.
It is the service opened when establishing IPSEC
tunnel.
It is security management service. It allows to
manage FW device through military security
management platform.
It selects the area from which service request is
sent. The area must be selected from existing
ones. For configuration and illustration of area,
please refer to section Configuring Area
Resource.
It is a string, the name of area.
It sets ID for permitted address object.
It is a number.
It sets name for permitted address object.
It is a string. It must be a preset host, subnet
or scope address object.
Description
This modifies one open service rule.
Function
This modifies one
open service rule.