Commands in this module are used for application protocol filter-
ing-related configurations.
To access this command module, execute the following command:
ZXR10_FW #dpi
To exit from this command module, execute the following com-
mand:
ZXR10_FW #end
1. Enabling SIP service.
Command
ZXR10_FW.dpi #sip start
2. Disabling SIP service.
Command
ZXR10_FW.dpi #sip stop
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 Protocol Filtering Configuration
Function
This enables SIP
service.
Function
This disables SIP
service.
105