Zte ZXR10 8900 Series User Manual page 44

ZXR10 8900 Series User Manual (FW Volume)
34 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10_FW.define# range rename oldname
range1 newname range2
4. Deleting one address range.
Command
ZXR10_FW.define#range delete [id
<number1>][name <string>]
Parameter Description:
Parameter
delete
id
<number1>
name
<string>
Command Illustration:
To delete address range, it is available to delete the address
range according to address range name, address range id or
both. However, in case address range id and address range
name are inconsistent, address range name shall apply.
When no parameter is given, the address range not quoted by
policy is deleted.
Example:
To delete address range1, execute the following command:
ZXR10_FW.define# range delete name range1
5. This deletes all address ranges not quoted by policy.
Command
ZXR10_FW.define#range clean
6. Showing all address ranges.
Command
ZXR10_FW.define#range show
Description
This deletes address range.
This specifies ID of the address range to be
deleted.
This is one number, indicating ID of address
range.
This specifies name for address range to be
deleted.
This is one string, indicating the name of
address range.
Function
This deletes one
address range.
Function
This deletes all
address ranges not
quoted by policy.
Function
This shows all address
ranges.