Alarms; Configuring Logs And Alamrs; Configuring Log - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (FW Volume)
124 Confidential and Proprietary Information of ZTE CORPORATION

Alarms

ZXR10 8900 Series Switch FW service card FW module has com-
prehensive alarm prompt function, supports mail alarming, voice
alarming, console alarming and other alarming modes. Firstly,
administrator needs to add alarm rules and set alarm objects and
parameters. Then set security events triggering alarm rules, in-
cluding device faults and administrator predefined security events.
When security event occurs, FW will trigger corresponding alarm
message according to rule.

Configuring Logs and Alamrs

Configuring Log

This topic describes how to configure log.
To access this command module, execute the following command:
#log
To exit from this command module, execute the following com-
mand:
#end
1. Setting log server.
Command
ZXR10_FW.log #log set ipaddr
<ipaddress>[port <string>][ logtype
<syslog|welf>][trans<enable|disable>]
Parameter Description:
Parameter
set
ipaddr
<ipaddress>
port
<string>
logtype
syslog|welf
Function
This sets log server.
Description
This sets log server.
This set IP address of log server.
This is one string, indicating IP address.
This sets port of log server.
This is one string, indicating port id, in
format of tcp:80 or udp:80.
This sets log transmission format: syslog
or welf
This is log transmission format, syslog by
default.