Zte ZXR10 8900 Series User Manual page 62

ZXR10 8900 Series User Manual (FW Volume)
52 Confidential and Proprietary Information of ZTE CORPORATION
To add service http8080, set protocol number to 6 and port id
to 8080, and set httpservice to be the content of comment,
execute the following command:
ZXR10_FW.define# service add name http8080
protocol 6 port 8080 comment httpservice
2. Modifying one customized service.
Command
ZXR10_FW.define#service modify name
<string1>[protocol <number1>][port
<number2>][port2 <number3>][comm
ent <string2>]
Parameter Description:
Parameter
modify
name
<string1>
protocol
<number1>
port
<number2>
port2
<number3>
comment
<string1>
Command Illustration:
Services are classified into default services provided by sys-
tem and user customized services. As for default services,
user cannot perform add, delete, modify and some other op-
erations.
Example:
To modify port id of service http8080 from 8000 to 8080 and
modify protocol number to 4, execute the following command:
ZXR10_FW.define# service modify name http8080
port 8000 port2 8008 protocol 4
3. Renaming customized service.
Description
This modifies one service.
This specifies the name of service to be
modified.
This is one string, indicating name of customized
service.
This sets L3 or L4 protocol number.
This is one number, indicating protocol number.
This modifies the start port, from which service
is enabled. In case only one port is available, it
only needs to set start port and doesn't need to
set end port.
This is one number, indicating id of start port.
This modifies end port of service.
This is one number, indicating id of end port.
This modifies content of comment.
This s one string, indicating the contents of
comment.
Function
This modifies one
customized service.