Table of Contents
Advertisement
im Vertrieb von
Operation
Front Panel Controls and Indicators
The front panel controls (fi gure 3-1) are grouped into two sets. The input and
output buttons are on the left side of the control panel. The control buttons and
video/audio (I/O) selection buttons are on the right side of the panel.
Figure 3-1 — MPX 866 A
Defi nitions
The following Extron matrix switcher terms are used throughout this manual:
Tie — An input-to-output connection.
Set of ties — An input tied to two or more outputs. (An output can never be tied
Confi guration — One or more ties or one or more sets of ties.
Current confi guration — The confi guration that is currently active in the
Global memory preset — A confi guration that has been stored. Up to 32 global
Computer video input and output buttons and LEDs
a
b
www.camboard.de
MPX 866 A Media Presentation Matrix Switcher • Operation
3-2
CAMBOARD Electronics
1
5
COMPUTER INPUTS
COMPUTER INPUTS
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
COMPUTER/AUDIO OUTPUTS
COMPUTER/AUDIO OUTPUTS
2
5
to more than one input.)
switcher (also called confi guration 0)
memory presets can be stored in memory. Preset locations are assigned to
the input buttons and (where necessary) output buttons. Up to 26 presets
can be selected from the front panel for either saving or retrieving. When a
preset is retrieved from memory, it becomes the current confi guration. Preset
numbers larger than 26 are accessible under RS-232 and Ethernet control.
Computer input subgroup buttons and LEDs — The computer video input
buttons and LEDs have two primary functions (•) and two secondary (❏)
functions:
•
Select a computer video and/or audio input.
•
Identify the selected computer video and/or audio input.
❏
Select a preset. See Using global presets on page 3-23.
❏
Display the output volume level. See Viewing and adjusting the output
volume on page 3-32.
Computer/audio output subgroup buttons and LEDs — The computer/
audio video output buttons and LEDs have two primary functions (•) and
two secondary (❏) functions:
•
Select computer video and/or audio output(s).
•
Identify the selected computer video and/or audio output(s).
❏
Mute the output. See Muting and unmuting video and/or audio outputs on
page 3-20.
❏
Display the audio level of the selected input. See Viewing and adjusting the
input audio level on page 3-28.
Tel. 07131 911201
Fax 07131 911203
3
VIDEO INPUTS
VIDEO INPUTS
10
11
12
13
14
CONFIG
8
9
10
11
12
ENTER
PRESET
VIDEO OUTPUTS
VIDEO OUTPUTS
4
6
7
ce-info@camboard.de
CONTROL
I/O
VIEW
ESC
VIDEO
AUDIO
MPX 866 A
PRESENTATION MATRIX SWITCHER
8 9
10
11
Advertisement
Table of Contents
