Table of Contents
Advertisement
5.4
Viewing the Data Recorder File
To view the DR file that you have just activated, you must complete the following steps:
In the SETUP menu, activate the DR submenu using the joystick (
1.
2.
Use the joystick (
3.
Move the joystick left or right (
4.
Press and hold the center of the joystick (
5.
When in Acquire Mode, press the center of the joystick (
As shown in Figure 17 on page 132, the DR file is displayed on the right side of the display screen.
USM Go Operator's Manual
) to select the function titled DR VIEW. Then, press the center of the joystick (
) to select the ON option. Then, press the center of the joystick (
) to switch to the Acquire Menu.
).
) to enter the full-screen display mode.
Chapter 5. Data Recorder Files
) to activate the function.
) to deactivate the function.
131
Advertisement
Table of Contents
