GE Ultrasonic USM Go Operator's Manual page 45

2.3.1d Setting the Date and Time Formats
In the SETUP menu, activate the CONFIG1 submenu using the joystick (
1.
2. Use the joystick (
function.
3. To change the selected date and time format, either move the joystick or press the function toggle. Choose from the following date and
time formats:
Y-M-D date format and 12 or 24 hour time format
•
M/D/Y date format and 12 or 24 hour time format
•
D.M.Y date format and 12 or 24 hour time format
•
4. After making your choice, press the center of the joystick (
display screen and in the out reports are now set to the choice last selected.
USM Go Operator's Manual
(SETUP-CONFIG1-DATE FORMAT)
) to select the function titled DATE FORMAT, then press the center of the joystick (
). Several functions are displayed on the screen.
) to deactivate the function. The date and time format shown on the
Chapter 2. Instrument Setup
) to activate the
27