Table of Contents
Advertisement
2.3.2 Display Appearance
Follow the procedures in this section to adjust the display appearance. The adjustments require access to the CONFIG1 submenu, which is
accessed from the SETUP menu (see Figure 10 on page 23).
2.3.2a
Setting the Display Color (SETUP-CONFIG1-COLOR)
In the SETUP menu, activate the CONFIG1 submenu using the joystick (
1.
2.
Use the joystick (
There are four preset color schemes.
3.
To change the display color scheme, either move the joystick or press the function toggle.
4.
After making your choice, press the center of the joystick (
USM Go Operator's Manual
) to select the function titled COLOR, then press the center of the joystick (
). Several functions are displayed on the screen.
) to deactivate the function.
Chapter 2. Instrument Setup
) to activate the function.
31
Advertisement
Table of Contents
