Df - Display File Data - GE 68K System User Manual

68K System Monitor
User's Guide

DF - Display File Data

o
CPM
Platform
Use this command to display the contents of any file in memory in text or binary
Description
format.
The default is binary format, which mimics the dump command by displaying the
binary values first, then the printable ASCII values afterward.
You may view any file recognized by the Installable File System.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
o o
D20 D20 ME
D20 Base D20 Base
df [/(b | t)] filename
/b = Display contents in binary format (default).
/t = Display contents as text.
filename = The full path name of the file to be displayed.
Type df /b config.bin and press
Results: The monitor displays the contents of the file
config.bin in a manner similar to the dump command.
By not providing any other switch, the command selects the
binary dump format, and is identical to the dump memory
command format except that it lacks the address prefix.
SWM0023-1.00 -2
þ o
D20/200 D20/200 ME
CCU Base CCU Base
.
ENTER
GE Energy Services
þ
D25
3-23