GE Ultrasonic USM Go Operator's Manual page 63

2.4.6 Selecting the Pulser Width (OPTIONAL) (cont.)
To set a pulser width:
1. In the ACQUIRE menu, activate the PULSER submenu using the joystick (
2. Use the joystick (
Press the function toggle or move the joystick (
3. After completing your selection, move the joystick up or down (
USM Go Operator's Manual
) to select the function titled WIDTH, which is only available if the PULSER TYPE function is set to square.
) to set the width of the pulser.
).
) to navigate away from this function.
Chapter 2. Instrument Setup
45