Table of Contents
Advertisement
Chapter 4. Data Sets & Reports
4.3
Creating a Memo
Memos may be attached to Data Set Files at the time the files are stored or to Reports at the time they are generated. After a
the attached memo may be modified. To create or edit a
1.
In the SETUP menu, activate the FILES submenu using the joystick (
2.
Use the joystick (
3.
A text area for the memo is now available on the display, with the cursor positioned for the first character.
(
) to enter the first character in the memo. Then, move the joystick left or right (
character position in the text string.
4.
Repeat step 3 until you have entered the entire memo. Then, press the center of the joystick (
120
memo:
) to select the function titled MEMO EDIT. Press the center of the joystick (
).
) to move the cursor to a different
) to deactivate the function.
file is stored,
) to activate the function.
Move the joystick up or down
USM Go Operator's Manual
Advertisement
Table of Contents
