Connecting The Usb Port - GE Ultrasonic USM Go Operator's Manual

1.5.3 Connecting the USB Port

The connector closest to the hinge of the top compartment cover (see Figure 5 on page 13) is a Micro USB port. If you use a standard USB
cable to connect the USM Go to a PC (no special drivers are required), the installed SD card will be added to the list of active drives on the
PC. You can then perform all normal drive activities, such as copying and deleting files, on the USM Go SD card.
Important:
While the USM Go is connected to a PC via the USB port, the instrument will not accept any user input from the keypad.
Normal operation resumes as soon as the USB cable is disconnected.
USM Go Operator's Manual
Chapter 1. General Information
15