1.4.1 Accessing the Acquire Mode Menu
To access the Acquire Mode menu, refer to the left side of Figure 4 on page 10 while completing the following steps:
1.
Move the joystick left or right (
parameters available in the highlighted menu.
2.
Move the joystick up or down (
3.
While the desired parameter is highlighted, change its value by moving the joystick to the left or right (
of the function toggle (
acts as a fine adjustment. For selecting a parameter value from a list, either the joystick or the function toggle may be used to step
through the list one item at a time.
Note: Pressing both ends of the function toggle simultaneously resets a highlighted parameter to its default value.
USM Go Operator's Manual
) until the desired menu is highlighted on the menu bar. The function bar automatically shows the
) to highlight the desired parameter.
). For parameters with continuous values, the function toggle acts as a course adjustment, while the joystick
Chapter 1. General Information
) or by pressing either end
11