Table of Contents
Advertisement
5.1.2
File Naming Mode
1.
Use the joystick (
(
) to activate the function in File Naming mode.
2.
Move the joystick up or down (
(
) to move the cursor to another character position in the text string. Repeat the process until you have entered the entire file name.
3.
Press the center of the joystick (
USM Go Operator's Manual
) to select the function titled FILENAME in the DR SETUP submenu. Press the center of the joystick twice
) to choose the first character in the desired file name. Then, move the joystick left or right
) to deactivate the function.
Chapter 5. Data Recorder Files
129
Advertisement
Table of Contents
