Table of Contents
Advertisement
Chapter 4. Data Sets & Reports
4.2.1a
File Selection Mode
1.
Use the joystick (
in File Selection mode.
2.
Move the joystick up or down (
3.
Press the center of the joystick (
4.2.1b
File Naming Mode
1.
Use the joystick (
in File Naming mode.
2.
Move the joystick up or down (
(
) to move the cursor to another character position in the text string. Repeat the process until you have entered the entire file name.
3.
Press the center of the joystick (
116
) to select the function titled FILENAME. Press the center of the joystick once (
) to select the desired file name from the list of SD card files.
) to deactivate the function.
) to select the function titled FILENAME. Press the center of the joystick twice (
) to choose the first character in the desired file name. Then, move the joystick left or right
) to deactivate the function.
) to activate the function
) to activate the function
USM Go Operator's Manual
Advertisement
Table of Contents
