Chapter 4. Data Sets & Reports
4.5
Creating a Report Header
Report Headers are attached to data set files at the time the files are stored. After a file is stored, the attached
To create or edit a Report
Header:
1.
In the SETUP menu, activate the FILES submenu using the joystick (
2.
Use the joystick (
3.
A text area for the header is now available on the display, with the cursor positioned for the first character.
down (
) to enter the first character in the header. Then, move the joystick left or right (
character position in the text string.
4.
Repeat step 3 until you have entered the entire header (nine characters maximum). Then, press the center of the joystick (
deactivate the function.
122
) to select the function titled HEADER EDIT. Press the center of the joystick (
).
) to move the cursor to a different
Report Header may be edited.
) to activate the function.
Move the joystick up or
) to
USM Go Operator's Manual