6.1
Selecting a Data File (DR - EXPLORER) (cont.)
To select a second file, scroll to the second file and press ENTER to confirm your selection. The DMS Go closes the first file and opens the
second file.
Note: Only one file can be open at any given time.
To delete a file, scroll to the file and press F3 (DELETE). The DMS Go asks for confirmation. Press F2 or center-press YES.
To exit the Explorer function, press F4 (EXIT). Note, however, that the currently open file remains on the display.
6.2
Viewing the Data Recorder File in a List or Spread Format (DR - VIEW)
To view the DR file that you have selected, complete the following steps:
To set up a viewing format, use the joystick (
Off, List and Spread. Move the joystick left or right (
List displays the file by location, value, comments and flags in a one-dimensional format.
•
Spread displays the file by location and data points (see Figure 29 on the next page). The display format is maintained.
•
Off closes the file display completely.
•
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled VIEW in the DR submenu. Three choices are available:
) to scroll to the desired selection:
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 6. Working with Recorded Data
1-847-577-3980
Info@BergEng.com
109