Including A Header In A Report - GE Ultrasonic USM Go Operator's Manual

4.6

Including a Header in a Report

After creating a header, you can specify whether that header is included in a report. To add or remove a
1. In the SETUP menu, activate the FILES submenu using the joystick (
2. Use the joystick (
function.
3. Move the joystick left or right (
YES - the header is included with a report
•
NO - the header is not included with a report
•
4. After making your choice, press the center of the joystick (
USM Go Operator's Manual
) to select the function titled HDR IN REPORT. Press the center of the joystick (
) to select one of the following options:
).
) to deactivate the function.
Chapter 4. Data Sets & Reports
header from a report:
) to activate the
123