Table of Contents
Advertisement
Chapter 3. Making Measurements
3.1.1b
Adjusting the Gate Width (
In the ACQUIRE menu, activate the GATE A or GATE B submenu using the joystick (
1.
2.
Use the joystick (
3.
To change the gate width, either move the joystick (
Note: This function has both coarse and fine adjustment modes. Coarse adjustments are made with the function toggle, while fine
adjustments are made with the joystick.
4.
After completing your selection, move the joystick up or down (
66
GATE A WIDTH or GATE B-GATE WIDTH)
) to select the GATE A WIDTH (or GATE B WIDTH) function.
) or press the function toggle.
) to navigate away from this function.
).
USM Go Operator's Manual
Advertisement
Table of Contents
