Table of Contents
Advertisement
Chapter 4. Data Sets & Reports
4.9
Fast Report
The Fast Report option performs the same basic function as the Store Report option. The difference is that, if you save the A-Scan screen
image along with the report, the image is saved as a bitmap file. This permits the save operation to be completed significantly faster, but you
should be aware that some SD card printers may not recognize the bitmap file. To use the Fast Report option:
1.
Use the joystick (
2.
Move the joystick up or down (
(
) to move the cursor to a different character position in the text string.
3.
Repeat step 2 until you have entered the entire file name. Then, press the center of the joystick (
4.
If you have not already done so, assign the COPY function to one of the Function Toggle buttons (see "Defining Function Toggle
Actions" on page 35). Your report can now be saved by pressing the assigned toggle button, whenever you are in Acquisition Mode and
the cursor is in the menu bar or the full-screen display is active.
126
) to select the function titled FILENAME. Press the center of the joystick (
) to choose the first character in the desired filename. Then, move the joystick left or right
) to activate the function.
) to deactivate the function.
USM Go Operator's Manual
Advertisement
Table of Contents
