Selecting The Pulser Type (Optional) - GE Ultrasonic USM Go Operator's Manual

2.4.5 Selecting the Pulser Type (OPTIONAL)

The standard pulser shape is a spike, and there is also an optional square pulser shape available. If the PULSER TYPE option is activated,
choose between the spike and square options as follows:
1. In the SETUP menu, activate the CONFIG2 submenu using the joystick (
2. Use the joystick (
function.
3. Press the function toggle or move the joystick (
activate the function.
Note: This selection influences the VOLTAGE settings available and the availability of a PULSER WIDTH function, which is only
available when a SQUARE wave is specified.
4. After making your choice, press the center of the joystick (
USM Go Operator's Manual
) to select the function titled PULSER TYPE. Then, press the center of the joystick (
) to select SPIKE or SQUARE. Then, press the center of the joystick (
).
) to deactivate the function.
Chapter 2. Instrument Setup
) to activate the
) to
43