GE Ultrasonic USM Go Operator's Manual page 43

2.3.1b Setting the Units of Measurement
In the SETUP menu, activate the CONFIG1 submenu using the joystick (
1.
2. Use the joystick (
following options are available:
mm - default setting which displays values in millimeters
•
INCH - displays values in inches
•
3. To change the units of measurement, either move the joystick or press the function toggle.
4. After making your choice, press the center of the joystick (
USM Go Operator's Manual
(SETUP-CONFIG1-UNITS)
) to select the function titled UNITS, then press the center of the joystick (
). Several functions are displayed on the screen.
) to deactivate the function.
Chapter 2. Instrument Setup
) to activate the function. The
25