Setting The Display Delay - GE Ultrasonic USM Go Operator's Manual

2.5.2 Setting the Display Delay

The display delay function shifts the displayed A-Scan to the left or the right in the viewing window. To set the display delay:
In the ACQUIRE menu, activate the RANGE submenu using the joystick (
1.
2. Use the joystick (
3. Press the function toggle or move the joystick (
echoes shift to the left or the right.
Note: Pressing both buttons on the Function Toggle simultaneously resets the DELAY to the default value of 0.
4. After completing your selection, move the joystick up or down (
USM Go Operator's Manual
) to select the function titled DISPLAY DELAY.
) to change the display delay. As you change the value, you should see the displayed
).
) to navigate away from this function.
Chapter 2. Instrument Setup
53