Data Protection; App Data Protection; Recorder Data Protection - GE SEER 1000 Operating Manual

Data Protection

For data protection purposes, both apps employ access control using two
levels of password protection. The first level is the administrator pas s-
word; the second level is the ECG technician password. Setting these
passwords is explained in the section "Changing the Administrator Pass-
word" on page 58 (for the Apple iOS app) or 71 (for the PC app).

App Data Protection

Only an ECG technician to whom a Technician ID has been assigned can
access the app.
Only the administrator can enter and assign a Technician ID to an ECG
technician.
The ECG technician enters the default password given in this operating
manual and changes it to his or her personal password. After that, only
the administrator can reset the technician's password.

Recorder Data Protection

Once communication with a recorder has been established using an app,
a protection key, which is automatically generated from the administrator
password, is downloaded to the recorder. After that, the recorder can only
be accessed by the app having the same administrator password.
Access is blocked until the patient demographic and ECG data have been
downloaded by MARS or CardioDay and subsequently deleted from the
recorder. Thus, ECG technicians administrated by the same administrator
have access to each other's recorders at any time. Persons outside the
control of the administrator will not be able to access these recorders and
will receive the error "The password stored in the recorder does not match
the current administrator password." when trying to connect to a device
from the app.
NOTE
If the administrator changes his or her password, recorders protected
by the previous administrator password are no longer accessible until
the data has been downloaded and deleted.
2067634-077 Revision B
Applications (Apps) – General Information
SEER™ 1000 53