Table of Contents
Advertisement
1.3.2 Keypad Components
The USM Go keypad includes the following items (see Figure 2 on page 5):
•
Center-press joystick (
may either be "pressed" or "pressed and held."
•
Gain toggle (
): The two ends of the gain toggle act as separate buttons. One end is the "Gain DOWN" button, while the other end is
the "Gain UP" button. Either end of the gain toggle can either be "pressed" or "pressed and held."
•
Function toggle (
): The two ends of the function toggle act as separate buttons. One end is the "Function 1" button, while the other
end is the "Function 2" button. Either end of the function toggle can either be "pressed" or "pressed and held."
Note: The gain toggle is always at the top of the instrument, and the end of the function toggle closer to the display is always the
"Function 1" button, regardless of the chosen instrument orientation.
USM Go Operator's Manual
): The joystick may be moved either "left or right" or "up or down." In addition, the center of the joystick
Chapter 1. General Information
7
Advertisement
Table of Contents
