Table of Contents
Advertisement
4.2.2
Recalling a Data Set File
After selecting the RECALL DATASET action (see "The FILES Menu" on page 114), continue as follows:
1.
Use the joystick (
File Selection mode.
2.
After the list of data set files available on the SD card is displayed, move the joystick up or down (
set file name from the list.
3.
After selecting the desired data set file, press the center of the joystick (
USM Go Operator's Manual
) to select the function titled FILENAME. Press the center of the joystick (
) to deactivate the function.
Chapter 4. Data Sets & Reports
) to activate the function in
) to select the desired data
117
Advertisement
Table of Contents
