Pulser - GE Ultrasonic USM Go Operator's Manual

A.3 Pulser
Note: All pulser measurements were taken according to EN12668 specifications.
Pulser Mode:
Pulser Voltage (SQ Mode):
Pulser Falling/Rising Time:
Pulser Width (SQ Mode):
Pulser Amplitude (Spike Mode):
Damping:
USM Go Operator's Manual
Standard: simulated spike
Optional: uni-polar square wave via software control
20 V to 300 V, with a 10 V step and tolerance of 10%
10 ns maximum
30 ns to 500 ns, with a 20 ns step and a tolerance of 10%
Low: 120 V
High: 300 V
50 ohms or 1000 ohms
137