Service - Motorola RFS7000 Series Reference Manual

2.1.6 service

Common Commands
Use this command to service/debug the RFS7000 Switch.
Syntax (User Exec)
service [diag|encrypt|locator|save-cli|show]
service diag [enable|identify|limit|period <100-30000>|watchdog]
service diag limit [buffer(128|128k|16k|1k|256|2k|32|32k|4k|512|64|64k|8k)<0-
65535> |
fan <1-3>|filesys (etc2|flash|var)|
inodes (etc2|flash|var)|load (1|15|5)|maxFDs <0-32767>|
pkbuffers <0-65535>|procRAM < 0.0-100.0>|ram <0.0-25.0>|
routecache <0-65535>|temperature <1-8>]
service encrypt (secret)<2> LINE
service show [cli|command-history|crash-info|diag|info|memory|process|
reboot-history|startup-log|upgrade-history]
Parameters (User Exec Only)
diag
enable
identify
limit {buffer
(128|128k|16k|1k|256|2k|
32|32k|4k|512|64|64k|8k)
<0-65535>
fan <1-3>
Diagnostics.
Enable in service diagnostics.
Identify this switch by flashing the LEDs.
Use this parameter to set the diagnostic limit submodes/commands. Configure
the buffer usage warning limit. The warning limit can be set to one of the
following sizes:
• buffer – Buffer usage warning limit.
• 128 – 128 byte buffer limit.
• 128k – 128k byte buffer limit.
• 16k – 16k byte buffer limit.
• 1k – 1k byte buffer limit.
• 256 – 256 byte buffer limit.
• 2k – 2k byte buffer limit.
• 32 – 32 byte buffer limit.
• 32k – 32k byte buffer limit.
• 4k – 4k byte buffer limit.
• 512 – 512 byte buffer limit.
• 64 – 64 byte buffer limit.
• 64k – 64k byte buffer limit.
• 8k – 8 byte buffer limit.
• <0-65535> – Buffer usage warning limit 0-65535.
Use this parameter to set the fan speed limit. Configure the fan speed limit for
both fans or just one of them.
2-13