If The Line Is Busy; If The Transmission Fails - Minolta MINOLTAFAX 1600e Operator's Manual

3-17
How to Transmit a Document - Basics
10
When the transmission is completed, a
buzzer sounds and the message "TX
COMPLETE" is shown for 2 sec., indicating
that the document has been successfully
transmitted to the other party.
TX COMPLETE

If the Line is Busy

If the line is busy and the fax is unable to
transmit the document to the other party, the
Auto Redial function is automatically
activated and the fax repeats dialing the

If the Transmission Fails

If the transmission fails, a buzzer sounds
intermittently for 2 sec. and the Error
Indicator lights up.
The fax then automatically prints a TX RX
Result Report. For more details, see "TX RX
Result Report." pp. 9-3, 9-5
Press the Stop key.
REDIAL ALL FAILED
TOKYO
The Error Indicator will go out. Note the
reason for failure on the TX RX Result
Report and retry transmission or check to
insure the fax number is correct.
1
4503U327
Error
4503U3AI
4503U309
Stop
4503U17I
11
Then, the initial screen reappears.
JUN. 8
- SET DOC. FACE DOWN -
If you want to know the result of the
transmission, check it either by using the
Confirm function or by printing the Activity
Report. p. 9-1
number.
For details, see "Redial Transmission."
p. 6-3
15:38 100%
4503U229