Minolta MINOLTAFAX 1600e Operator's Manual page 130

6
When you have completed checking for the
parties you poll, press the Start key.
• The specified parties are sequentially
polled for Polling RX.
Example:
( OSAKA ) 90%
- SET DOC. FACE DOWN -
• If Reserv. Report of Reporting available
from the SET utilities has been set to ON,
the fax prints a Polling Reservation Report
before it executes the polling sequence.
pp. 9-1, 9-10
When there are plural parties, the fax prints
an RX Result Report, where an error is
detected or not, after the completion of
Polling Rx.
When there is only one party, the fax prints
an RX Results Report only when an error is
detected.
a TX/RX Result Report.
pp. 9-3, 9-5
Go through the report and retry polling for
those parties from which the document was
not received.
7
If the Line is Busy:
If the line of a party is busy and the fax is
unable to receive the document, that party is
put at the end of the polling sequence.
This party is polled again after the fax has
completed polling for all other parties.
Controlling the Transmission of a Document from Another Party (Polling RX)
Start/Copy
4503U16I
4503U411
8
If Your Fax Failed in Reception:
If reception fails, a buzzer sounds
intermittently for 2 sec. and the Error
Indicator lights up.
On completing the reception of the
document from all the specified parties, the
fax then prints a TX/RX Result Report. For
details, see "TX/RX Result Report."
pp. 9-3, 9-5
REDIAL ALL FAILED
TOKYO
Press the Stop key.
Retry Polling RX.
4-30
Error
4503U3AI
4503U309
Stop
4503U17I