What To Do First Before Making Any Communications (Initial User Data); Setting The Machine Operation (Telephone Line: Tone/Pulse) - Minolta MINOLTAFAX 1600e Operator's Manual

What to Do First Before Making Any Communications
(Initial User Data)
• Before making the first communication after your fax has been installed, you must make the following
settings for Machine Operation and Initial User Data.
The data recorded through these operations is printed as the header in a document transmitted and
footer in a document received (Header Print and Footer Print functions). The data is also used for
timer communications, reports, and password communications.
• Machine Operation
3. Tone/Pulse
NOTE
If the telephone line settings are wrong, you cannot make a phone call or fax communication. Follow
the procedure given below to ensure that you make correct settings.

Setting the Machine Operation (Telephone Line: Tone/Pulse)

1
Check that the initial screen is shown.
JAN. 1
- SET DOC. FACE DOWN -
2
Press the Set key five times to set your fax
into the Machine Operation mode.
Set
MACHINE OPERATION
YES / OR 1 - 5
3
Press "3" of the Numeric keys to show "3
Tone/Pulse" on the display.
3
• Initial User Data
1. Date & Time 2. User Fax No. 3. User Name 4. User Password
15:38 100%
4503U211
X 5
4503U85I
4503U219
DEF
4
Press "3" of the Numeric keys to show "3
Tone/Pulse" on the display.
3
3 TONE / PULSE
5
Using the Left Arrow key or the Right
Arrow key, select the type of telephone line
you are currently using.
• the Left Arrow key: Tone (default setting)
• the Right Arrow key: Pulse
L
TONE
- SELECT & PUSH "YES" -
2-12
DEF
4503UF3I
4258U018
R
4503UC7I
PULSE
4258U016