Setting Multi Sort Copy - Minolta MINOLTAFAX 1600e Operator's Manual

Setting Multi Sort Copy

1
To select Multi Sort Copy, press the Yes key.
Yes
The original placed on the Document
Feeding Tray is taken up and fed in and the
fax scans it into memory.
2
After scanning all pages into memory, the
fax starts the copy cycle and feeds the copies
onto the Print Tray.
Using the Convenient Copy Function (Convenient Copy)
NOTE
The fax may not be able to store the data if
there is not enough memory available for use
4503UAI
to accommodate the data.
JUN. 8
- SET DOC. FACE DOWN -
In this case, wait for the memory volume to
increase or cancel the Convenient Copy func-
tion and copy the document by Single Copy.
Or other jobs previously stored in memory can
be printed out to provide memory space for
your new document.
When a document for transmission has been
stored in memory
Output a Memory Image Print.
Check the contents of the document, remove it
from the memory, and after the current docu-
ment has been transmitted, make the job setup
4503U711
again for that document.
When a document received has been stored in
memory
Print the document received according to the
required procedure.
• Memory RX
• Mailbox RX
15:38 7%
4503U611
pp. 9-1, 9-8
p. 5-19
p. 4-17
7-6