Minolta MINOLTAFAX 1600e Operator's Manual page 154

5
Setting print timer
TIME =
OK = YES
Using the Numeric keys, enter the time (24-
hour system) at which you want a printout.
Example: 3:05 p.m.
JKL
1
5
If you do not want to set the print timer,
press the Yes key.
The display then prompts you to enter the
password. See steps 7 and 8.
Yes
6
Make sure that the password has been
correctly set, then press the Yes key.
TIME = 15 : 05
OK = YES
Yes
To change the set time, press the NO key.
Then, the display prompts you to enter the
time.
Enter the new time.
No
7
Setting the password
PASSWORD =
OK = YES
Using the Numeric keys, enter the password
for Memory RX printout. A password is a 4-
digit number ranging between 0000 and
9999.
Example: 6237
MNO
ABC
6
2
:
4258U188
JKL
5
0
4503U43I
4503UAI
4258U189
4503UAI
4503UBI
4258U189
PQRS
DEF
3 7
4503U44I
8
If you do not want to set a password, press
the Yes key.
Yes
9
Make sure that the correct time has been set,
then press the Yes key.
PASSWORD = 6237
OK = YES
Yes
To change the set password, press the NO
key.
The display now prompts you to enter a
password.
Enter a new password.
No
The setting of the memory reception mode
[ON] is completed.
The initial display is changed to the memory
reception display.
<< M - RX >>
- SET DOC. FACE DOWN -
NOTE
How to change the Timer and Password
To change the time setting of Timer and the
registered passward, you need to turn OFF the
Memory Reception Mode. (Print out the
received document stored in memory and can-
cel the Memory Reception Mode.)
Turn OFF the Memory Reception Mode
according to the next page [Printing the Docu-
ment Received by Memory RX Mode] and can-
cel the memory reception mode.
Reset the Memory Reception Mode and enter
the Timer and password again.
5-20
Setting of RX Operations
4503UAI
4258U191
4503UAI
4503UBI
100%
4258U192