If The Line Is Busy; If The Transmission Fails; Using The One Touch Dial Function - Minolta MINOLTAFAX 1600e Operator's Manual

3-7
How to Transmit a Document - Basics

If the Line is Busy

If the line is busy and the fax is unable to
transmit the document to the receiving party,
the Auto Redial function is automatically
activated and the fax repeats dialing the
number.

If the Transmission Fails

If the transmission fails, a buzzer sounds
intermittently for 2 sec. and the Error
Indicator lights up.
The fax then automatically prints a TX RX
Result Report. For more details, see "TX RX
Result Report." pp. 9-3, 9-5
REDIAL ALL FAILED
TOKYO

Using the One Touch Dial Function

The One Touch Dial function allows you to transmit a document to a particular party by pressing one
of the One Touch Keys which has previously been programmed with that party's information.
To use this function, you must previously program the fax number and other data for particular parties
into different One Touch Keys.
You can also register the PC access number when the destination fax is connected to a PC.
Two fax numbers or telephone numbers can be registered to each One Touch key. Please note, how-
ever, that these cannot be registered to One Touch keys already assigned for external line connection.
01
11
For more detailed programming procedures, see "Registering One Touch Dial and Speed Dial Sta-
tions". p. 2-19
Error
4503U3AI
4503U309
02 03 04 05
12 13 14 15
For details, see "Redial Transmission."
p. 6-3
REDIAL WAITING
TOKYO
Press the Stop key.
The document is fed out and the Error
Indicator will go out. Note the reason for
failure on the TX RX Result Report and
retry transmission or check to insure the fax
number is correct.
06 07 08 09
16 17 18 19
4503U308
Stop
4503U171
10
20
4503U34I