When A Document Or Paper Misfeed Has Occurred; Clearing A Document Misfeed - Minolta MINOLTAFAX 1600e Operator's Manual

When a Document or Paper Misfeed Has Occurred

When a document or paper misfeed has occurred in the fax, clear the misfeed by following the procedure
given below.
The fusing section of the Upper Unit becomes very hot during operation. Do not touch the
area as it may cause burns.

Clearing a Document Misfeed

1
Open the Scanner Cover.
NOTE
When clearing a misfeed with the Scanner
Cover open, be sure to hold the cover with one
hand.
2
Pull out the page or pages from the
Document exit port.
ATTENTION
3
Close the Scanner Cover.
The error message is reset and the initial
4503UB22
screen reappears.
NOTE
If multi-page documents are misfed or piggy-
backed (two or more sheets are stuck and fed
together), set the documents with each page
shifted and parted slightly from the beneath
page as if the forefront of them form a wedge
viewed from the side.
4503UC01
12-4
4503UB24
5mm
5403U324