Turning On And Off The Fax; Turning The Fax On - Minolta MINOLTAFAX 1600e Operator's Manual

Turning ON and OFF the Fax

Keep the Power Switch in the | (ON) position to maintain constant communication. If it is in the O
(OFF) position, the fax is neither able to receive a document nor store the contents of the document in
its memory. Communication is also interrupted if the Power Switch is pressed to the O (OFF) position
during communication.

Turning the Fax ON

Error Manual RX
PLEASE WAIT
PC
Standard
Fine (S-Fine)
Half Tone
Resolution
Memory TX Set Function
Confirm
Error Manual RX
PC JAN. 1
- SET DOC. FACE DOWN -
Standard
Fine (S-Fine)
Half Tone
Resolution
Set
Memory TX Confirm Function
NOTE
• While the fax is warming up, it can receive or transmit a document, but not print a document
received.
• After completing warm-up, the fax enters the Power Save mode automatically.
• You can set the time it takes to enter the Power Save mode, or turn the mode OFF through the Set
function. For details, see Chapter 8 "Setting the Set Utilities"
4503U209
Yes No
0:00 100%
No
Yes
4503U210
Press the Power Switch to the | (ON) position.
When the fax is turned ON:
The message "PLEASE WAIT" appears on the
Message Display.
The fax is now ready for transmitting or receiving
documents.
The Resolution indicator lights when the message
display changes.
The fax completes warming up approx. 25 sec.
after the Power Switch has been pressed to the |
(ON) position.
p. 8-1
2-6