Minolta MINOLTAFAX 1600e Operator's Manual page 10

ii
• Do not modify this product, as a fire, electrical shock, or breakdown
could result. If the product employs a laser, the laser beam source
could cause blindness.
• Do not attempt to remove the covers and panels which have been fixed
to the product. Some products have a high-voltage part or a laser
beam source inside that could cause an electrical shock or blindness.
• Only use the power cord supplied in the package. If a power cord is
not supplied, only use the power cord and plug that is specified in
POWER CORD INSTRUCTION. Failure to use this cord could result
in a fire or electrical shock.
• Use only the specified power source voltage. Failure to do that could
result in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appliances
or machines. Use of a power outlet for more than the marked current
value could result in a fire or electrical shock.
Do not unplug and plug in the power cord with a wet hand, as an elec-
trical shock could result.
Plug the power cord all the way into the power outlet. Failure to do this
could result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull
on, or damage the power cord. Use of a damaged power cord (exposed
core wire, broken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the
power switch, unplug the power cord from the power outlet, and then
call your authorized service representative.
• In principle, do not use an extension cord. Use of an extension cord
could cause a fire or electrical shock. Contact your authorized service
representative if an extension cord is required.