Minolta MINOLTAFAX 1600e Operator's Manual page 113

4-13
Transmitting a Document at a Specified Time (Timer TX)
7
When the receiving destination has been
specified, the document placed on the
Document Feeding Tray is fed in and the fax
starts scanning it into memory.
After scanning the document, the fax shows
the initial screen on the Message Display,
entering the standby state for Timer TX.
JUN. 8 15:38
- SET DOC. FACE DOWN -
When the set time arrives, the fax
automatically transmits the document to the
specified destination(s).
NOTE
• All fax transmission functions can be used
even while the fax is in the standby state for
Timer TX.
• When you changed the contents of the desti-
nation registered for One Touch Dial and
Speed Dial before starting the Timer trans-
mission, the changed destination is deleted
from the destinations to which you want to do
the Timer transmission.
If you want to do the Timer transmission to
the changed destination, you need to reset the
Timer transmission again.
Example:
4503U321
1. To set the Broadcast by the Timer transmis-
sion
•Transmission party: One Touch key 01, 02,
80%
•Setting of the transmission time: 23:00
•Registration time: 12:00
2. To change the data of the One Touch key
4503U427
• Transmitting by One Touch key 01:
Change the fax number of the destination.
•Registration time: 15:00
•Transmission party: One Touch key 02, 03
One Touch key 01 is automatically deleted
from the Timer and Broadcast transmis-
sion.
3. To reset the Timer transmission
• Reset the new One Touch key 01 to the
Timer transmission
•Transmission party: One Touch key 01
•Setting of the transmission time: 23:00
03