Print Density; Rec. Paper Size; Tx Operation; Page Count Tx - Minolta MINOLTAFAX 1600e Operator's Manual

4. Print Density

Sets the printout density of the documents you receive. Select the density to suit the type of document you
will most frequently receive.

5. Rec. Paper Size

Sets the size of the paper for printouts of documents received. Set to the size of the paper loaded in the
Paper Feeding Tray. Ensure that the Rec. Paper Size setting matches the size of the paper actually loaded
in the tray. Whenever you change the paper size in the tray, be sure to change the Rec. Paper Size setting.
p. 11-2

3. TX Operation

1. Page Count TX

Checks the number of pages transmitted against the number of pages scanned for transmission. If there is
any discrepancy, the fax gives an alarm beep and alarm display, and warns of the abnormal transmission
by means of a TX/RX Result Report.

2. Password TX

Only when your password corresponds with the destination's password can you transmit a document to
that destination. When Password TX is set to ON, you cannot transmit a document unless you use the
destination's password. If transmission is using the One Touch key or Speed key, you can transmit a doc-
ument. Password TX provides a means of controlling fax communications and, when transmitting an
important document, avoiding transmission to the wrong destination.

3. Header

Transmits to the receiver your name, fax number, and other data for a document transmitted to them. The
header information prints at the top of the page. This lets the receiving party identify where the document
came from, when it came in and how many pages it was.
p. 5-17

4. RX Operation

1. Memory RX Mode

Stores in memory the contents of a document received. The document is not printed unless the fax
receives a print command which may be a timer or password.
• The timer print command causes the fax to start printing the document stored in memory when the
specified time arrives.
• The password print command causes the fax to start printing when a password is input.
This feature provides a means of controlling the documents received through fax.
* To cancel the password print mode, you must input the password selected when the mode was set
before it can be turned off.

2. No. of Rings

Sets the number of rings before the fax call is received. Set as required.
3. Multi Page Print
Automatically prints multiple copies of the pages of a document received.
pp. 9-3, 9-5, 12-1, 12-2
8-4
Outline of the SET Utilities